Meco 67A4T09K21 manual Important Notice

Page 32

32

Problem

Flare up

Persistent grease fire

Unable to fill LP tank

Humming or whistling from regulator

Possible Cause

Grease build-up

Excessive fat in meat

Grease trapped around burner system

Some dealers have older fill nozzles with worn threads

Outside temperature, humid- ity, barometric pressure, and the gas level within the tank may cause the rubber dia- phragm inside the regulator to vibrate, making a humming or whistling sound.

Solution

Clean grill.

Trim fat from meat before grilling.

Turn Control Knobs “Off” and turn handle of LP Gas Cylinder clockwise until it stops. Open Hood carefully and let fire burn out. After the grill cools, remove and clean all parts.

The worn nozzles do not have enough “bite” to engage the valve. Try another licensed LP dealer.

Although this sound may be alarming, this is NOT danger- ous as long as it is not accompanied by the smell of gas. Simply adjust the Burner settings, and usually the sound will subside. If the humming sound persists, a change in atmospheric conditions will eventually stop the vibration.

If your problem is not resolved from the information provided above,

please call Customer Service at 1-800-251-7558. If you need a replacement part under warranty, a proof

of purchase will be necessary.

IMPORTANT NOTICE

The Gas Grill is set up to operate with a LP Gas Cylinder equipped with an OPD (Overfill Prevention Device).

This is a secondary device to prevent overfilling your LP Gas Cylinder. The proper methods for the filling of your LP Gas Cylinder are by weight or volume, as described in NFPA 58. Please make sure your filling station fills your LP Gas Cylinder by weight or volume. Ask your filling station to read purging and filling instructions on the LP Gas Cylinder before attempting to fill.

Rises up while filling, then stops when full.

!WARNING

Do not exchange the LP Gas Cylinder unless the exchange LP Gas Cylinder is equipped with an OPD. Otherwise you will lose the OPD (Overfill Prevention Device) feature. If there is not an LP Gas Cylinder available for exchange equipped with an OPD, we recommend that you have your LP Gas Cylinder filled at an authorized LP gas dealer by a qualified attendant.

Image 32
Contents LP Gas Grill Assembly and Use Manual Sets Up In MinutesTools Required for Assembly Carbon Monoxide HazardPacking List DescriptionContents Preparation for Assembly Step Securing Cart Leg Frames Assembly InstructionsStep Wheel Assembly Step Steel Privacy Panel Assembly Step Cylinder Blocking Wire AssemblyStep Hood/Body To Cart Assembly Step Side Table Assembly Step Side Burner Valve Assembly Step Side Burner Igniter Wire ConnectionStep Side Burner Control Knob Assembly Side Burner Grid AssemblyStep Bottom Body Panel Assembly Foil Pan/Grease Pan AssemblyStep Flavor Activator / Cooking Grid / Warming Rack Assembly Step Battery in Igniter InstallationLP Gas Cylinder Connecting/Disconnecting the GasUsing Gas LP Hose and Regulator Connecting LP Gas CylinderDisconnecting LP Gas Cylinder Before Using Your LP Gas Grill Installation CodesSelecting a Location Performing a Leak TestHow to Perform a Leak Test First Time USE and as required Page Lighting the Grill Using the Pulse-Spark Ignitor Off positionManual Lighting of the Grill on Manually Lighting the Grill Manually Lighting the Side Burner Lighting the Side BurnerCheck The Flame Manually Lighting the Side Burner Cooking On the Gas Grill Grill Cooking Direct MethodIndirect Cooking Roasting Roasting Indirect MethodDirect Cooking on the Grids Warming Rack End of Cooking SessionCare and Maintenance Cleaning the GrillHow to Clean the Burners Open up Storage Troubleshooting EmergenciesSee How to Clean Burners in Care and Maintenance Clean the Burners. See How to Clean Burners in CareMaintenance Important Notice This page intentionally left blank Parts Illustration Parts List Key Description QuantityLimited Warranty Meco Corporation Limited Warranty