Meco 67A4T09K21 manual Step Steel Privacy Panel Assembly, Step Cylinder Blocking Wire Assembly

7

Step 3

Steel Privacy Panel Assembly

Locate the one 5/32 x .47” bolt into the threaded hole near the top on the inside of each front leg. Unscrew each until the bolt head is up at least 1/4” from the surface. Do the same for the bolts at the front of the bottom shelf.

A. Place the bottom edge of the panel inside the leg brackets, between the legs.

B. At the top, guide the L-slots on the sides of the panel onto the bolts on the inside of the legs.

C. Lower the panel so that the bolts in the bottom shelf come up through the keyhole slots in the bottom of the panel. Push the bottom of the panel towards the front of the cart to lock the panel in the keyhole slots. Be sure all bolts are in the slots then tighten bolts securely.

B

C

A

!WARNING

To reduce the risk of serious bodily injury or death from fire or explosion:

Never remove guards or devices to prevent storage of spare or oversize LP Gas Cylinders not recommended for this grill.

Step 4

Cylinder Blocking Wire Assembly

Attach Cylinder Blocking Wire to Cabinet Bottom with two 5/32 x .47” Bolts.

5/32 x .47” Bolt

2 pcs