Meco 7652K6, 7652K5, 7652K1 manual Fig. B

Page 10

STEP 6-Continued Grill Body/Cart Assembly (See also page 11 for Wood Cart Assembly)

·Carefully lay Grill Body Assembly on its back side with Front panel facing up and Hood open. Lay Cart Assembly on the back side with the Grill Body between Side Tables. (Note: Wheels on Cart assembly are to the left.) (FIG. A)

·Align slotted holes on sides of Grill Body Assembly with holes in edges of legs (FIG. B). Insert Body Spacers between Leg and Grill Body. (You can pull the legs away from the body since all the bolts are loose.) Insert two 6mm x 90mm Body Bolts through Leg, Spacers and slotted holes in Grill Body. Attach a 6mm Wing Nut to the Bolts, but do not tighten. Repeat this assembly for remaining three Cart Legs.

·With help from a second person, turn full Grill and Cart Assembly upright. The Grill Body should slide down to seat itself within the slotted

holes. If not, loosen the Body bolts and push down at all four corners.

·Tighten all Body Bolts and Wing Nuts.

Wingnut

· Tighten all other Bolts at his time.

 

 

 

View from inside

 

 

 

Body Spacer

 

 

 

Bolt

Body/Cart Assembly

 

 

 

 

FIG. B

View from back side of

Leg/Body Assembly

after standing up

FIG. A

10

Image 10
Contents Monaro Charcoal Grill Contents Parts Illustrations Hood w/Embossed Logo 25A Hood w/Decal Logo Shown Tools Item 2BItem 5A Item 6BPage Spacer, 6mm Page FIG. B View from back side Body/Leg Assembly After standing up Page Before Using Your Charcoal Grill Operating and Maintaining Your Charcoal GrillStarting a Fire For Grilling Grill Cooking Care and Maintenance END of Cooking SessionAussie