STEP
(ITEM 12) |
|
Slide Vent | (ITEM 13) Bolt, 6mm |
|
|
| (ITEM 15) | (ITEM 14) | |
|
| Sleeve | ||
|
| Washer, 6mm | ||
(ITEM 11 or 11A) | (ITEM 16) | Spacer, 6mm | ||
| ||||
Body Assembly |
|
| ||
Locknut, 6mm |
|
| ||
|
|
|
·Open the Hood on the Grill Body.
·Align slotted holes in Slide Vent with holes in Grill Body Side.
·Insert a 6 mm x 16 Bolt through the 6mm Steel Washer and Sleeve Spacer. Position this assembly with the Sleeve Spacer inside the Slide Vent slotted hole. Attach 6mm Steel Washer and Locknut to Bolt from inside of Grill Body to secure the Slide Vent. Repeat for each slotted hole on both Slide Vents.
·Make sure the Vents slide back and forth freely over the Sleeve Spacers. If not, loosen the bolts slightly and reset the Spacers inside the Slide Vent slotted holes and retighten.
Sleeve Spacer inside |
slotted hole of Slide vent |
8 |