STEP
(ITEM 17) Bolt, 6mm x 90 mm
(ITEM 19) Handle Spacer (ITEM 18 or 18A) Hood Handle
·Open Hood and lay it on on its backside.
·Insert 6 mm x 90 mm Bolt through recessed hole of Hood Handle, through Handle Spacer through a hole in Hood. (Note: Wide end of Handle Spacer goes against the Hood.)
·Attach a 6mm Washer and Locknut to the Bolt from inside Hood. Do not over tighten; it may crack the Hood finish.
·Repeat for other end of Handle.
(ITEM 14) Washer 6 mm
(ITEM 16) Locknut 6mm
Assembled Handle
STEP
Assembly of Grill Body will require two people.
(ITEM 11 or 11A) Body Assembly
(ITEM 17) Bolt, 6mm x 90 mm
(ITEM 17A) Bolt, 6mm x 110 mm
| (ITEM 20) Body Spacer |
9 | (ITEM 21) Wingnut, 6mm |
|