Char-Broil 463250511 manual Assembly

ASSEMBLY

	Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.
1
	Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining
	casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front.
	After all 4 casters are secure remove the Bent U Pin and save for future maintenance.
	Non-lock caster	A
		Bent U pin
Locking caster

Front

Bottom shelf

Rear

2	Attach side panels to bottom shelf using three
	1/4-20x1/2”screws per panel.

IMPORTANT: Panel with large hole must be on left side of bottom shelf.

Left side panel

Make sure side panels are pushed as far to the rear of bottom shelf as possible before fully tightening screws.

Door magnet

1/4-20x1/2” screw

Right side panel (with large hole)

13