Char-Broil 463620809 manual Burner ,Firebox and Control Knob, 5x15 Fiber washer

9

Burner ,Firebox and Control Knob

Place burner assembly into firebox. Fasten the burner assembly to the firebox using 5x15 Fiber washers and #10-24x1/2’’ Machine screws. Insert #10-24x1-1/4’’ Machine screws from outside the firebox, then fasten with #10-24 Flange nuts and 5x15 Fiber washers from the inside( A ).

Place firebox on cart. Make sure burner tubes are correctly engaged with valves. If burner is not level from left to right, adjust the two screws attaching valve to control panel. Attach ignitor wire to ignitor( B ).

Attach firebox with #10-24x2’’ Machine screws, 5x15 Fiber washers and #10-24 Wing nuts( C) . Push control knobs onto valve stems ( C ).

Burner assembly

Firebox

#10-24X1-1/4’’	#10-24 Flange nut
Machine screw	Qty. 8

A

#10-24 Flange nut

#10-24x1-1/4" Machine Screw Qty. 4

5x15 Fiber washer	5x15 Fiber Washer
	Qty. 10

5x15 Fiber washer

#10-24x2’’ Machine Screw

5x15 Fiber washer

C

Control Knob

B

#10-24X1/2’’ Machine Screw

Heat shield

for Tank

Valve Ignitor wire

Venturi tube

Make sure the Venturi tubes are located

underneath Heat Shield

#10-24 Flange nut

#10-24X1/2”

Machine Screw

Qty. 2

#10-24x2”

Machine Screw

Qty. 4

21