Char-Broil 463620809 manual Lid, Heat Tent and Cooking Grate, Swing Away

13

Lid

Place lid assembly onto firebox, aligning hinges. Upper Hinges fit inside lower hinges. Secure using two hinge pins and hitch pins. Tighten upper hinge screws.

Hinge Pin

Qty. 2

Hitch Pin

Qty. 2

14

Heat Tent and Cooking Grate

Place heat tent into firebox. Align the slots on heat tent to heat tent support screws. Place cooking grate onto firebox.

Cooking Grate

Heat Tent

15

Swing Away

Insert ends of Swing Away pivot wire into holes in sides of grill lid. Insert ends of Swing Away leg wire into holes in sides of firebox. NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are on top, swing away is installed upside-down.

Swing Away

Pivot wire

Leg wire

24