16
Place cooking grates onto the firebox as shown. Insert the two wire ends at rear of warming rack into holes in back of firebox. Front wires of warming rack rest on sides of firebox.
Note: Some parts omitted for clarity of illustration
Assembled warming rack
Warming rack
Cooking grate
17
.
LP CYLINDER IS SOLD SEPARATELY. Fill and leak check the cylinder before attaching to grill and regulator (see Use & Care section). Once cylinder has been filled and leak checked, place cylinder into hole in bottom shelf. Make sure cylinder valve is facing front of grill. Secure cylinder with cylinder screw under bottom shelf. Insert regulator through large hole in
left side panel. See Use & Care section of this manual to perform the “Burner Flame Check” and for important safety instructions before using.
Cylinder screw at rear of cart
Cylinder screw
LP Cylinder ( not included)
Always keep LP cylinders in upright position during use, transport, and storage.
CAUTION | Regulator |
Cylinder valve must face to front of cart once tank is attached. Failure to install cylinder correctly may allow gas hose to be damaged in operation, resulting in the risk of fire.
25