Char-Broil 11601558-A1, 11601579 manual Grill Body Assembly, Studs, Located on, Lower Body

Step 3 -

Step 1

6 ASSEMBLY GUIDE GRILL BODY Assembly

Part	Qty.
B1– Lower Body	1	10-24x3/8"
B2– Wind Shield	1	screw
		(qty 3)	1/4-20x3/4"	Fiber Washer	1/4-20 Nut	10-24 Nut
B3– Grill Lid	1
			Hinge	(qty 5)	(qty 2)	(qty 10)
			screw
			(qty 2)

- Attach the Lower Body (B1) to the Cart Assembly by aligning the studs on the bottom of the grill with the corresponding holes in the tops of the leg assemblies. Secure with 7 each 10-24 nuts. A Nut Driver (not supplied) will work nicely for this step.

Attach the Wind Shield (B2) to the Lower Body (B1) by aligning the holes in the panels with the corresponding holes in the Lower Body. Secure with 3 10-24 nuts, 3 10- 24x3/8" Screws, and fiber washers. The Wind Shield will

rest inside the Lower Body.

			10-24x3/8"
Studs	10-24	B2	Screws
	Nuts		(3 each)
located on
	(3 each)

Lower

Body.

B1

Fiber

B1

Washer

(3 each)

Step 2 - With the legs assembled to the Lower

Body, tighten the 4 screws holding the Cart

Bracket in place. Once complete, turn the grill over

to the upright position.

Cart

Bracket

B1

Step 4 - Attach the Grill Lid (B3) by aligning the hinge holes in the lid to the matching holes in the Wind Shield (B2). Insert 2 Hinge Screws into the holes and secure with 2 1/4-20 nuts and two Fiber washers from the inside of the

grill.

1/4-20x3/4"

B3	Hinge
	Screws
	(2 each)

Fiber

Washer

(2 each)

1/4-20

Nuts

(2 each)

Visit www.sizzleonthegrill.com/user-forumsto chat with Patio Bistro® owners just like you!