:_,STEP6 - Computer Tube Assembly
a)Remove (4) Allen Bolts and (4] Washers from Main Frame.
b)Connect Main Frame wires to wires in Computer Tube (remove twist ties] and carefully tuck wires into Main Frame while sliding Computer Tube onto Main Frame, see Figure 6,
Be careful not to pinch the wires. Genlly pull the wires up from the top of lhe Computer Tube to prevent any slack in the wires at the base of the Computer Tube.
c)
that were removed in Step 6a and tighten with Multi Hex Tool.
|
| computer |
|
| tube |
|
| hondebor |
|
| tube wires (4) |
M8 x ]5ram |
| M8 x 15rnm |
|
| |
allen bait | M8 | allen barfs |
\washer
w#es(4]
Figure 6 - Install Computer Tube
_;TEP 7 - Foot Pedal Assembly
The Foot Pedals, Pedal Shafts and Pedal Straps are marked "R" for Right or "L"for Left,
a)insert Pedal Shaft of Left Foot Pedal into threaded hole in Left Crank, see Figure 7.
b)Turn Pedal Shaft by hand counterclockwise until snug. Note: DO NOT turn the Pedal Shaft
clockwise, doing so will strip the threads. Tighten shaft with Mufti Hex Tool provided.
e)Insert Pedal Shaft at Right Foot Pedal Into threaded hole in Right Crank,
d)Turn Pedal Shaft by hand clockwise until snug. Tighten with Mufti Hex Tool provided,
left left
sffap crank
pedal
