M8 _c:_hers
t /1
front handebar
_ | eornputer tube |
Figure 8 - Instofl Front Handlebar
STEP 9 - Computer Installation
a)Remove batlery door from back of Computer, insert [4) "C" batteries and replace the battery door,
Note: DO NOT use reehargeable
batteries, | doing | so will cause | a |
short and | destroy | the computer, | bolts |
b)Remove (4) Phillips Bolts from back of Computer,
_°STEP8 - Front Handlebar
Installation
a)Remove (2) Allen Bolts, (2] Washers and
(2)Nylon Nuts from Front Handlebar,
b)Align bolt holes in Front Handlebar with holes in Computer Tube,see Figure 8.
c)
(2]Nylon Nuts that were removed In step
8a and tighten,
Back
View
back of
,sbolts
computer book holder
computer tube
c)Connect Computer Wires and Computer Tube Wires together and carefully tuck wires into Computer Tube,see Figure 9c,
d)Mount Computer to Computer Tube using the
[4)Phillips Bolts removed in Step 9b and tighten,
e)Book Holder can be attached to the front of the Computer at any time.
Front
View
computer
tube wire
computer tube
Figure 9 - Install Computer
_10
