On fascia to attach bezel

First, remove the two screws and lock washers factory attached to the sideburner valve bracket.

Position sideburner valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes on valve bracket with left and right holes on fascia. Secure using screws and lock washers that were removed from bracket, shown A.

Place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on fascia. Attach sideburner bezel to fascia using two #8-32x3/8”screws and 4mm lock washers.

Press sideburner control knob onto valve stem, shown B.

Screws and washers

removed from valve bracket

Sideburner shelf

Note: Use left and right holes on fascia to attach valve bracket

Sideburner shelf Fascia

Valve bracket

Note: Make sure set the Bezel with longer slot at the top.

Control Knob	Note: Use upper and lower holes
	on fascia to attach bezel

valve stem

#8-32x3/8”
screw	4mm Lock
	washer
	Sideburner Bezel

valve stem

#8-32x3/8”

screw

4mm Lock

washer