The Rotisserie System
Stainless Steel Outdoor Cooking Center
Assembly
On 24″ models the motor is mounted by sliding it down into place in the metal channel attached to the right side of the grill. The skewer is connected to the motor assembly by placing the pointed end through the motor access hole in the grill and into the motor. The left side of the skewer rests in the grill groove.
On 27″ models the motor is mounted to a metal channel which attaches to the left side of the grill and is tightened into place with a thumb screw. Ensure that the motor is straight prior to tightening the thumb screw.
The rotisserie motor on 36″ and 48″ models is secured down to a cast rotisserie block with the black
On 36″ and 48″ models, the skewer or the rotisserie is attached to the motor assembly by placing the pointed end into the motor and resting the threaded end on the support at the left side (right side on 24″ and 27″ models) of the grill.
With the skewer pushed as far as possible into the motor, the grooved skewer bushing should rest on the left side bracket.
The removable black handle should only be in place when handling the skewer. Remove the handle when cooking to allow the lid to close and avoid melting the handle with heat from the
24″ model rotisserie assembly
27″ model rotisserie assembly
36″ and 48″ model rotisserie assembly
16