Operating Instructions

A-6	A-6

The Utility Cart is designed for hand moving only. Do not attempt to pull the cart with any mechanized vehi- cle.

Use the cart on a level surface only. Moving the cart over steep inclines could cause the cart to roll out of control, or tip over. Either situation could result in damage to the cart, welder, or injury to the operator.

The K520 Utility Cart is designed to work only with the Lincoln products listed below. Use with other welders or equipment could cause overloading, or result in unstable operations.

PRODUCTS SUPPORTED:

AC225-C

INVERTEC V160-S, INVERTEC V160-T

INVERTEC V205T AC/DC

PRO-CUT 25

Pro-MIG 175, Pro-Core 100

MIG PAK 10, MIG PAK 15, PRO 100, PRO 155,

PRO MIG 135

SP-75, SP-85, SP-100, SP-100-I, SP-100 T,

SP-125 PLUS, SP-130 T, SP-135T, SP135PLUS,

SP-140-I, SP170-I, SP-170 T, SP-175T, SP175 PLUS

Weld-Pak 100, Weld-Pak 100 HD, Weld-Pak 100

PLUS, Weld-Pak 125, Weld-Pak 155, UWW 170

Weld-Pak 175HD, Weld-Pak 3200HD,

Weld-Pak 5000HD

Weldmark 135 Plus