Chapter 4: Configuration and Setup
4. Configuration and Setup
Remove and discard all packaging materials and then lock the lockable casters.
Open and inspect the UCC to verify all doors, locks, and casters are working properly.
Do not plug the UCC into a wall outlet until all configurations and setup are complete.
4.1 Installing the Handle
The handle/cord wrap installs on the side of the cart with the locking swivel casters.
NOTE: The casters swivel on one side of the UCC and are fixed on the other. Consider maneuverability options before installing the handle.
Step 1: Locate the side of the cart with the locking swivel casters.
Step 2. Place the handle so that the holes in the brackets are aligned with the threaded holes in the side panels.
screws | ||
screws | ||
Handle | ||
|
Figure 4-1. Handle assembly.
Step 3. Using a Phillips-head screwdriver, tighten four of the Phillips-head screws into the threaded holes.
Page 14 |
| UCCDM20T |