Desa CVTR24, CVTR18 installation manual Top, Gas leak. See Warning statement at

Page 16

VENTED NATURAL GAS LOGS

TROUBLESHOOTING

Continued

WARNING: If you smell gas

Shut off gas supply.

Do not try to light any appliance.

Do not touch any electrical switch; do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

IMPORTANT: Operating log set where impurities in air exist may create odors. Cleaning supplies, paint, paint remover, cigarette smoke, cements and glues, new carpet or textiles, etc., create fumes. These fumes may mix with combustion air and create odors. These odors will disappear over time.

OBSERVED PROBLEM

POSSIBLE CAUSE

REMEDY

Log Set produces a clicking/ticking noise just after burner is lit or shut off

1.Metal expanding while heating or con- tracting while cooling

1.This is common with most log sets. If noise is excessive, contact qualified ser- vice person

Log Set produces unwanted odors

1.

Log Set burning vapors from paint, hair

 

 

spray, glues, cleaners, chemicals, new

 

 

carpet, etc. (See IMPORTANT state-

 

 

ment above)

 

2.

Gas leak. See Warning statement at

 

 

top of page

1.Open flue to maximum. Stop using odor causing products while log set is running

2.Locate and correct all leaks (see Check- ing Gas Connections, page 8)

Gas odor even when control knob is in OFF

1.

Gas leak. See Warning statement at

1.

Locate and correct all leaks (see Check-

position

 

top of page

 

ing Gas Connections, page 8)

 

2.

Control valve defective

2.

Replace control valve

 

 

 

 

 

Gas odor during combustion

1.

Gas leak. See Warning statement at

2.

Locate and correct all leaks (see Check-

 

 

top of page

 

ing Gas Connections, page 8)

www.desatech.com

16

901049

Image 16
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASModels CVTR18 CVTR24 ApprovedSafety Information Vented Natural GAS LogsLocal Codes Unpacking Optional Product Features ON/OFF Safety VALVE/ Pilot KIT and PROPANE/LP ConversionRemote Control Ready Millivolt Safety VALVE/ Pilot KIT Remote Control AccessoriesAIR for Combustion and Ventilation Providing Adequate VentilationUnusually Tight Construction Confined and Unconfined SpaceDetermining FRESH-AIR Flow for Appliance Location AIR for Combustion VentilationDetermining if You Have a Confined or Unconfined Space Ventilation AIR Ventilation Air From InsideBuilding Ventilation Air From OutdoorsInstallation Flue Opening SpecificationsVenting Specifications for Installation Check GAS TypeInstalling Damper Clamp Connecting to GAS SupplyInstallation Items Needed Pressure Testing Gas Supply Piping SystemHearth KIT Assembly and Installation Kit AssemblyInstallation and Gas Connection Test Pressures Equal To or Less Than 1/2 PsigPropane/LP Gas Conversion Natural Gas InstallationBurner Inlet Fitting Adding PAN Material Testing Burner for LeaksChanging Pilot Orifice Installing the Ember BED and Logs For Your Safety Read Before LightingOperating Appliance Lighting InstructionsGAS Shutoff Valve Operation Curing LogsOperating Instructions for To Turn OFF GAS To ApplianceTroubleshooting Observed Problem Possible Cause RemedyClean pilot see Cleaning and Mainte Top Gas leak. See Warning statement atReplacement Parts Cleaning and MaintenanceAccessories Illustrated Parts Breakdown CVTR18 CVTR24Parts List KEY Part Number for CVTR18 CVTR24 Description QTYParts Centrals FBD901049 Vented Natural GAS Logs 901049 Keep this Warranty International