Desa TC36P, TC36N installation manual Ground Floor Installation, Round Termination

Venting Installation

instructions

Continued
Minimum Pipe	Siding Standoff
Overlap 11/4"
Direct-Vent
Pipe	Screws

		Wall
		Firestop
Maintain 1"
Minimum Air
Space Around						High Wind
Outer Pipe When						Termination
Penetrating a Wall						Apply
						Mastic to
10	3	4	3	4	"	Outside
		/ " x 10		/		Edge of
Framed Opening
						Standoff
		Exterior Wall with Vinyl Siding

Figure 13 - Typical Horizontal Termination Cap Mounting with Additional Siding Standoff Installed

Horizontal Termination Configurations Figures 14 through 18 show different configura- tions and alternatives for venting with horizontal termination. Each figure includes a chart with critical minimum and maximum dimensions which MUST be met. IMPORTANT: Remember that a horizontal run of venting must have a 1/4" rise for every 12" of run toward the termination.

NOTICE: Do not seal termination cap to vent pipe. Cap must be removable for vent inspection and maintenance.

WARNING: Never run vent downward as this may cause excessive temperatures which could cause a fire. Operation of improperly installed and main- tained venting system could result in serious injury, property damage or loss of life.

GROUND FLOOR INSTALLATION

Recommended Applications:

•Installation using cabinet surrounds

•Through the wall using round or square termina- tion (up to 12" horizontal pipe)

•NOT FOR CORNER INSTALLATION

Adjustable

Horizontal Pipe 12" Max. 45° Elbow

High Wind

Square

Termination

Wall Firestop

Square Termination

Vertical (V)		Horizontal (H)
32 3/4" min.		17" max.
	Exterior Portion
45° Elbow	of Wall Firestop
Wall	(Round
	Termination
Firestop	Only)

Horizontal

Round

Termination

Round

Termination

*If installing this fireplace at altitudes of

4000 feet and above, it is recommended that an additional vertical height of 6" be added to the vent system.

Figure 14 - Horizontal Termination Configuration for Square or Round Terminations

12 www.desatech.com 116192-01E