OWNER’S MANUAL
PRODUCT
IDENTIFICATION
Rear Burner
Grate
Burner |
| |
Pan |
| |
Front |
| |
Burner |
| |
Figure 1 - Product Identification | Valve | |
Cover | ||
|
Serial Number ________________________________________
LOCAL CODES | UNPACKING |
OPTIONAL
PRODUCT
FEATURES
ON/OFF SAFETY VALVE/ PILOT KIT AND PROPANE/LP CONVERSION
An optional valve/safety pilot kit with a piezo ignitor is available for this appliance. This system requires no matches, batteries, or other sources to light. You must use this optional system for LP conversion. See Ac- cessories, page 17.
REMOTE CONTROL READY (MILLIVOLT) SAFETY VALVE/ PILOT KIT
An optional millivolt valve/safety pilot kit with a piezo ignitor is available for this appliance. This system requires no matches, batteries, or other sources to light. This system may be connected to a wall switch or
REMOTE CONTROL
ACCESSORIES
There is an optional
Install and use log set with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANS Z223.1, also known as NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
CAUTION: Do not remove the metal data plates from the burner pan. The data plates contain im- portant product information.
1.Remove logs, hearth kit, pan materi- als, and hardware from carton.
2.Remove all protective packaging ap- plied to logs and base for shipment.
3.Check all items for any shipping dam- age. If damaged, promptly inform dealer where you bought the product.
accessories with this appliance. See Acces- sories, page 17.
LOG SETS
Model VTLCR18 log set is for use with Model VVTR18 burner set. Model VTLCR24 log set is for use with Model VVTR24 burner set. Use these log sets only with their corresponding burners.
901847 | 3 |