WARNING
Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to the owner’s information manual provided with this appliance. For assistance or additional information consult a qualified installer, service agency or the gas supplier.
CAUTION
Sharp Edges
•Wear protective gloves and safety glasses during installation.
A.Design and Installation Considerations
The Gas Log Hearth Kit consists of the following:
•Log Set
•Burner/Pan Assembly
•Grate Assembly
•Rock Wool
•Sand
•Lava Rock
•Damper Stop
•Vermiculite
•Platinum Embers
B. Tools and Supplies Needed
Tools and supplies normally required for installation:
Pliers
Phillips screwdriver Tape measure Crescent wrenches Gas shutoff valve
WARNING
HOT! DO NOT TOUCH.
SEVERE BURNS MAY RESULT.
CLOTHING IGNITION MAY RESULT.
Glass and other surfaces are hot during operation and cool down.
•Keep children away.
•CAREFULLY SUPERVISE children in same room as appliance.
•Alert children and adults to hazards of high temperatures.
•Keep clothing, furniture, draperies and other combustibles away.
-Review proper placement of logs, rockwool, lava rock and vermiculite.
-Check the wiring.
-Ensure there are no gas leaks.
-Ensure the flow of combustion and ventilation air is not obstructed (front grilles and vent caps).
•Before installing into a solid fuel burning fireplace, the chimney and firebox should be inspected and cleaned to remove soot, creosote, ashes, paint, bird nests etc.
•Annual examination of the chimney must be performed by a qualified agency to ensure proper ventilation of flue gases created by this appliance.
WARNING
Fire Risk
Exhaust Fumes Risk
•Do NOT use this appliance as a
The flue must be permanently open according to Tables 1 and 2.
C. Important!
•Do not remove any of the attached metal plates, which contain important safety and operating information.
•Keep the appliance area clear and free of all combustible materials, gasoline and other flammable vapors and liquids.
•Any safety screen or guard removed during servicing must be replaced before operation.
•A qualified service technician must perform installation and repair. The appliance should be inspected and cleaned annually by a qualified service technician. More frequent cleaning may be required due to excessive lint, dust, pet hair, etc. It is imperative that the control compartments, burners and air passageways are unobstructed during operation.
•Have the chimney and adjacent structure inspected and cleaned by qualified professionals. Hearth & Home Technologies recommends that NFI or CSIA certified professionals, or technicians under the direction of certified professionals, conduct a minimum of an NFPA 211 Level 2 inspection of the chimney.
•Replace component parts of the chimney and fireplace as specified by the professionals.
•Ensure all joints are properly engaged and the chimmney is properly secured.
•Do not allow fans to blow directly into the fireplace. Avoid any drafts that alter burner flame pattern.
•Do not use a blower insert, heat exchanger insert or other accessories not approved for use with this appliance.
Hearth & Home Technologies • Grand Oak Match Light Gas Log Sets •