Clearances, Drain Connector detail | Lennox Hearth E42ODGPE-H

When Planning for the installation of the fire- place, the framing height must be increased from 46-1/2 inches to 47-1/4 inches, when installing the drain pan. An additional space below the fireplace will also be required to plumb a drain line.

Step 1. Seal all joints, gaps and corners around the bottom of the drain pan before positioning the fireplace on its location (Figure 3 ).

Step 2. On the exposed drain hole, install a PVC threaded coupling reducer, 3/4" x 1/2" going from the top of the pan down through the hole. Apply a silicone-based sealant around the base and threads before installation.

Step 3. Holding the reducer coupling with a wrench, thread a 3/4", 90 degree, PVC elbow to the reducer until it is tight to the metal.

Step 4. Add additional piping to route the drain to an appropriate location.

Note: To assure proper drainage, the fireplace must be installed on a leveled surface.

Clearances

Minimum clearance to combustibles for the fireplace is as follows; sides and back – 1/2" (13mm), combustible floor – 0" (0mm), adja- cent wall 6" (152mm), ceiling – 50" (1270mm). Refer to Figure 4 on this page and Figure 18 on page 13 for more detail.

Note: Clearance behind the nailing flange for both fireplace models is 1/2" (13mm).

Note: Adjacent wall considerations are for an adjacent wall to only a single side. Walls should not be placed at the minimum distance on both sides of the fireplace. Allow at least 4 feet on one side of the fireplace.

	threaded	threaded
	reducer	threaded
	reducer	Elbow 3/4
	3/4 x /2	Elbow 3/4
	3/4 x /2	@ 90°
	(PVC)	@ 90°
		(PVC)
	drain Connector detail
	47 /4
	Figure 3

		Combustable Materials
		Allowed Flush With	/2” Airspace Clearance
		the Face Front	/2” Airspace Clearance
		the Face Front	to Sides And Back
/2” Airspace Clearance			to Sides And Back
/2” Airspace Clearance
to Sides And Back			/2” Clearance
			/2” Clearance
			Nailing Flange May
			Make direct Contact
			With Combustible
			Framing
No Material Within
the Face Opening		Noncombustable	No Combustables
Noncombustables		Noncombustable	Below the top Spacers
		Material Only	Below the top Spacers
		Material Only
May Overlap the Face	tOP VIEW
	tOP VIEW
		5”
		Only	/2”
		Noncombustable	/2”
		Noncombustable	Airspace
		Material May	Airspace
		Material May	Clearance
		Overlap the	Clearance
		Overlap the	to Back
		top Face	to Back
		top Face
		do NOt Overlap
		Material Within
		the Face Opening
		No Material
		Allowed in
		this Area
		Combustible Material
		May Overlap the
		Face Bottom up to 2”
Figure 4		Below the Face Opening	SIdE VIEW
Figure 4

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

E42ODGPE-H, E42ODGNE-H, E42ODGPE, E36ODGNE, E36ODGPE specifications

Lennox Hearth gas fireplaces are designed to offer both aesthetics and performance, making them a popular choice for homeowners seeking warmth and ambiance. The models E36ODGNE-H, E42ODGNE, E36ODGPE-H, E36ODGPE, and E36ODGNE stand out due to their innovative features and advanced technologies, ensuring efficiency while enhancing the overall look of any space.

One of the most significant features of these fireplaces is their impressive heating capacity. The E36ODGNE-H and E42ODGNE models provide substantial warmth, making them suitable for various room sizes. With a maximum BTU output reaching up to 40,000, they can effectively heat your living space while creating a comfortable environment. Additionally, the option for variable fan speed allows for consistent and efficient heat distribution, ensuring that every corner of the room remains cozy.

The design of Lennox Hearth fireplaces is both stylish and functional. The sleek glass doors provide a clear view of the flames, and the modern aesthetic can complement a variety of interior designs. With customizable finish options, homeowners can tailor their fireplace to match their decor, making it a focal point in their living space.

Another remarkable aspect of these models is their user-friendly control options. The integrated remote control allows for easy operation, letting users adjust flame height and fan speed with the push of a button. This convenience enhances the overall experience, allowing for seamless enjoyment of the fireplace.

Safety is also a priority in the design of Lennox Hearth fireplaces. These models come equipped with safety features such as an automatic shut-off system and a glass door that remains cool to the touch, ensuring that users can enjoy their fireplace without worry.

The efficiency of Lennox Hearth fireplaces is evident in their remarkable thermal efficiency ratings. These units are designed to maximize energy use, resulting in lower operating costs while still providing abundant warmth. This eco-friendly approach aligns with modern energy-saving standards, making these fireplaces an attractive choice for environmentally conscious consumers.

In summary, Lennox Hearth’s E36ODGNE-H, E42ODGNE, E36ODGPE-H, E36ODGPE, and E36ODGNE models present an intriguing combination of style, efficiency, and safety. Whether you are looking to enhance your home’s interior or seeking an effective heating solution, these fireplaces deliver the performance and elegance that discerning homeowners desire.

Clearances

3/4 x /2

drain Connector detail

47 /4

E42ODGPE-H, E42ODGNE-H, E42ODGPE, E36ODGNE, E36ODGPE specifications

3/4 x /2

47 /4