Fireplace Installation, Routing Gas Line | Lennox Hearth E36ODGNE-H

Fireplace Installation

Step 1. Frame these appliances as illustrated in Figures 7 through 9. All framing details must allow for a minimum clearance to combustible framing members, as shown in Figure 4 on page 5. Also refer to Fireplace Specifications on Page 8. Headers may be in direct contact with the appliance top spacers but must not be supported by them or notched to fit around them. All construction above the appliance must be self supporting. Do Not use the appliance for structural support.

Note: The framed depth from a framed wall, must always be measured from a finished surface. If a wall covering such as durrock is to be attached to the rear wall, then the depth must be measured from the wall surface. It is important that this dimension be exact.

Note: Non-combustible framing members are not required, but are recommended.

Step 2. Level the firebox by checking the top edge of the firebox. Shim if necessary.

Step 3. The fireplace should be secured to the side framing members, using the full length nail- ing flange located on both sides of the fireplace. Use 8d nails, or screws.

Important: Under no circumstances shall the firebox top spacers be re- moved or modified. The header may be in direct contact with the top spacers but must not be supported by them or notched to fit around them.

Step 4. Identify the desired location for the battery pack/ON/OFF switch junction box. This should be easily accessible and connivent for use. Avoid installing where the opening could be blocked by snow, bushes, etc. Also, considerations need to be made to avoid water infiltration. The electrical junction box must be positioned within range of the electrical umbili- cal cord (9 feet). Route the umbilical cord to the box to ensure proper length. Secure the umbilical cord per appropriate local and national electrical codes.

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Routing Gas Line

Route a 1/2" (13 mm) gas line along the inside of the right side framing as shown in Figure 5. Gas lines must be routed, constructed and made of materials that are in strict accordance with local codes and regulations.

All appliances are factory-equipped with a flexible gas line connector and 1/2 inch shutoff valve. (See Figure 12 on page 11).

right Side Front Corner Of Fireplace Framing

-3/4" (44 mm)

3-3/4" (95 mm)

Figure 5

Note: An addiional inlet has been provided on the left side (see Figure 6 ).

E42ODGPE-H, E42ODGNE-H, E42ODGPE, E36ODGNE, E36ODGPE specifications

Lennox Hearth gas fireplaces are designed to offer both aesthetics and performance, making them a popular choice for homeowners seeking warmth and ambiance. The models E36ODGNE-H, E42ODGNE, E36ODGPE-H, E36ODGPE, and E36ODGNE stand out due to their innovative features and advanced technologies, ensuring efficiency while enhancing the overall look of any space.

One of the most significant features of these fireplaces is their impressive heating capacity. The E36ODGNE-H and E42ODGNE models provide substantial warmth, making them suitable for various room sizes. With a maximum BTU output reaching up to 40,000, they can effectively heat your living space while creating a comfortable environment. Additionally, the option for variable fan speed allows for consistent and efficient heat distribution, ensuring that every corner of the room remains cozy.

The design of Lennox Hearth fireplaces is both stylish and functional. The sleek glass doors provide a clear view of the flames, and the modern aesthetic can complement a variety of interior designs. With customizable finish options, homeowners can tailor their fireplace to match their decor, making it a focal point in their living space.

Another remarkable aspect of these models is their user-friendly control options. The integrated remote control allows for easy operation, letting users adjust flame height and fan speed with the push of a button. This convenience enhances the overall experience, allowing for seamless enjoyment of the fireplace.

Safety is also a priority in the design of Lennox Hearth fireplaces. These models come equipped with safety features such as an automatic shut-off system and a glass door that remains cool to the touch, ensuring that users can enjoy their fireplace without worry.

The efficiency of Lennox Hearth fireplaces is evident in their remarkable thermal efficiency ratings. These units are designed to maximize energy use, resulting in lower operating costs while still providing abundant warmth. This eco-friendly approach aligns with modern energy-saving standards, making these fireplaces an attractive choice for environmentally conscious consumers.

In summary, Lennox Hearth’s E36ODGNE-H, E42ODGNE, E36ODGPE-H, E36ODGPE, and E36ODGNE models present an intriguing combination of style, efficiency, and safety. Whether you are looking to enhance your home’s interior or seeking an effective heating solution, these fireplaces deliver the performance and elegance that discerning homeowners desire.