Napoleon Grills M605RBCSS manual Tool Peg Installation, Side Shelf Installation

17

4 x N570-0088 (10-24 X 1/2”) 4 x N735-0007 (1/4”)

Tool Peg Installation

Fasten the supplied tool pegs to the side of each side shelf using (2) 10-24 X 1/2” screws and (2) 1/4” washers.

8 x N570-0082 (1/4-20 X 5/8”) 8 x N735-0001 (insulated washer) 3/8”(10mm)

Side Shelf Installation

Insert (2) 1/4-20 x 5/8” screws through washers into the top holes in side of base, do not tighten all the way. Slide side shelf over screw heads. Align bottom holes in side shelf with bottom holes in base, place remaining washers between side shelf and base as shown. Insert remaining screws through side shelf into base and finish tighting all screws.

LEFT SHELF RIGHT SHELF

www.napoleongrills.com