8
Rear Chamber Use (Rotisserie Burner): Remove the warming rack prior to use. Cooking grids should also be removed if they interfere with the rotisserie. Ensure rear chamber is installed on brackets located inside hood prior to lighting. The rear chamber is designed to be used in conjunction with the rotisserie kit (included with rear burner units) available from your dealer. See the rotisserie kit assembly instructions. To use the counterbalance, remove the rotisserie motor from the grill. Place the spit with meat being cooked across the hangers inside the grill. The meat will naturally hang with the heavy side down. Tighten the counterbalance arm and weight, so that the arm is facing up. Slide the counterweight in or out to balance the load, and tighten in place.
WARNING! Only install rear chamber when using.
WARNING! Never add charcoal starter fluid to hot or warm coals, once charcoal is ignited no more fluid is required.
After Use Safety
WARNING! To protect yourself and your property from damage, carefully follow these safety precautions.
•Close the grill lid and all vents to extinguish fire.
•Always allow the grill to cool completely before handling.
•Never leave coals and ashes in grill unattended. Make sure coals and ashes are completely extinguished before removing.
•Use a metal spatula or scoop to remove remaining coals and ashes from grill. Place them in a
www.napoleongrills.com