Assembly Step 5
Locate these parts:
| 3 Damper Plates | 2 Carry | ||
| Handles | |||
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Hardware: |
| HARDWARE BAG B HARDWARE BAG C | |
|
|
|
|
|
|
|
| |
Washers |
| ||
3 Required | 3 Required | 3 Required | 4 Required |
Tools needed:
Phillips Head
Screwdriver
1/2”
Wrench
1.For each damper plate, line it up with the damper openings on the outside of the smoker cabinet.
2.Insert a
3.From the inside of the smoker cabinet, thread on a lock washer and nut. Slightly tighten the nuts, but allow them to stay loose enough to freely rotate the damper plates.
4.For each carry handle, insert the mounting studs into the mounting holes on the sides of the smoker cabinet.
5.From the inside of the smoker cabient, thread on a nut onto each mounting stud. Securely tighten the nuts.
There are 3 damper locations and 2 carry handle locations - repeat steps until all are assembled.
8