Vermont Casting VC3624GS owner manual Connecting the LP Tank

Page 15

Connecting the LP Tank

ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE

FOLLOWED TO PREVENT FIRE, DAMAGE, AND / OR INJURY.

1. The knob on the LP tank must be closed. See that the knob is turned clockwise to a full stop.

2. Check that the control knob on the smoker is turned off.

3. Remove the protective cap from the LP tank valve and coupling nut, if present.

4. Hold the regulator in one hand and insert the nipple into the valve outlet. Be sure the nipple is centered in the valve outlet. The coupling nut connects to the large outside threads on the valve outlet. Use care - do not cross thread the connection.

5. Hand tighten the coupling nut clockwise until it comes to a full stop. Firmly tighten by hand only. Do not use tools.

CAUTION: In the connection process, the HVR side of the connection will seal on the back check in the valve, resulting in a slight resistance. The connection requires about one-half to three-quarters additional turn to complete the connection.

Any fuel supply cylinder used must be constructed and marked in accordance with specifications for propane cylinders of the U.S. Department of Transportation (DOT) CFR 49, or CAN/CSA B339. The appliances is to be used only with the 20 pound, vertical standing vapor withdrawal type tank.

(A) Do not store tanks under or near the smoker.

(B) Never fill tanks more than 80% full.

If instructions A and B above are not followed exactly, a fire causing death or serious injury may occur.

This smoker is designed to operate on LP (Liquefied Propane) gas only.

The 20 lb LP cylinder used with this smoker must conform to the following requirements.

Diameter- 12” (30.5cm)

Height 18” (45.7cm)

With a maximum capacity of 20 pounds

The gas cylinder used must include a collar to protect the cylinder valve. The cylinder supply system must be arranged for vapor withdrawal.

The instructions stated on gas cylinder tanks have to be followed when filling or transporting tanks. Failure to do so could result in problems relating to overfilling, excessive venting release of gas and to regulator freezing.

Do not allow dirt or foreign material to get into or onto tank connection when it is not attached to the fuel supply system. Use the protective cap provided.

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Assembly Table of Contents Read ALL Instructions and Warnings LP Tank Not Included Assembly Identifying the parts Identifying the Parts Hardware Assembly Step20 x 5/8 Bolts Remaining from previous step 20 x 1/2 Bolts Required Nuts Door Inside of Door Drip Pan Wood Box Lid Cooking Grids IncludedWood Box Rack Water Pan Hook Connecting the LP Tank Checking for Leaks Cooking Tip Pre-Use ProceduresOperating Instructions Adding WaterCooking Tip Flavoring Wood Adding WoodMatch Lighting Lighting Procedure Ignitor Lighting SystemShutting the Smoker Off Cooking Tip Damper AdjustmentsCooking Instructions Temperature Chart Care and Maintenance After Use Safety and MaintenanceManufacturer’s Limited Warranty

VC3624GS specifications

The Vermont Castings VC3624GS is a robust gas stove that seamlessly combines traditional craftsmanship with modern technological advancements, making it a preferred choice for homeowners seeking both warmth and elegance in their living spaces. Crafted from high-quality cast iron, the VC3624GS not only offers superior heat retention but also adds a classic aesthetic that enhances any interior decor.

One of the standout features of the VC3624GS is its impressive heating capability. With a powerful input of up to 30,000 BTUs, this gas stove can effectively heat areas up to 1,500 square feet. Whether you're looking to warm up a cozy den or a sizable living room, the VC3624GS is designed to deliver consistent and efficient heat output, ensuring that every corner of your space remains comfortable.

Equipped with the innovative SureFire electronic ignition, the VC3624GS provides reliable and quick lighting, eliminating the frustrations of traditional igniters. This technology ensures that the stove ignites with ease, even in adverse conditions, providing homeowners with peace of mind. Additionally, the unit features a variable flame control system that allows users to adjust the flame height and heat output to suit their specific needs, promoting energy efficiency.

The VC3624GS also showcases a beautiful ceramic glass viewing window, offering a mesmerizing view of the flames while maintaining high efficiency. The large glass front not only contributes to the overall ambiance but also enhances the stove's modern appeal. Its clean-burning design minimizes emissions and helps to keep your indoor air quality at safe levels, adhering to stringent environmental standards.

Durability is another significant characteristic of the Vermont Castings VC3624GS. Designed to withstand years of use, the cast iron construction provides unparalleled strength, while the porcelain enamel finish protects against rust and wear, ensuring the stove remains stunning season after season.

Moreover, the stove features an easy-to-access control panel, simplifying the operation and allowing users to adjust settings without hassle. The optional blower system can be integrated for enhanced heat distribution, maximizing comfort throughout the room.

In summary, the Vermont Castings VC3624GS gas stove stands out in the realm of home heating appliances with its blend of classic style, modern technology, and outstanding performance, making it a worthwhile investment for any homeowner looking to enhance their environment with warmth and elegance.
Top Page Image Contents