Important Facts about Using Smoker

ASSEMBLY INSTRUCTIONS Continued

Step 3

Insert temperature gauge (16) stem through hole in smoker door (9) as shown. Secure with wing nut (C).

Mount door handle (10) to smoker door (9) using screws (B).

•Maximum temperature will range between 350°F- 400°F (177°C- 204°C) when control panel is set on HI.

•Wood chip bowl MUST be in place when using smoker. This minimizes the chance of wood flare ups.

•Wood chips must be used in order to produce smoke and create the smoke flavor. See “Wood Smoking Guide for Meats” section in this manual.

•Check drip tray often during cooking. Empty drip tray before it gets full. Drip tray may need to be emptied periodically during cooking.

•Do not open smoker door unless necessary. Opening smoker door causes heat to escape and may cause wood to flare up. Closing the door will re-stabilize the temperature and stop flare up.

•Do not leave old wood ashes in the wood tray. Once ashes are cold empty tray. Tray should be cleaned out prior to and after each use to prevent ash buildup.

•This is a smoker. There will be a lot of smoke produced when using wood chips. Smoke will escape through seams and turn the inside of smoker black. This is normal. To minimize smoke loss around door, door latch can be adjusted to further tighten door against body.

SOME PARTS NOT SHOWN FOR

1CLARITY.

Step 4

Slide cooking grates (6) onto guides

6inside smoker body (1).

Loosen hex nut on door latch. Turn hook clockwise to tighten as shown. Secure hex nut firmly against door latch.

HOW TO CLEAN SMOKER

For cooking grates, water bowl and drip tray use a mild dish detergent. Rinse and dry thoroughly.

For wood chip bowl, clean frequently to remove ash build up, residue and dust.

For the interior and exterior of smoker simply wipe down with a damp cloth. Do not use a cleaning agent. Make sure to dry thoroughly.

ALWAYS MAKE SURE UNIT IS UNPLUGGED AND COOL

TO THE TOUCH BEFORE CLEANING AND STORING.