2HOW TO CLEAN FILTER; Fig. 2
CAUTION Before opening ENCLOSURE disconnect AC power supply.
1.Remove ENCLOSURE COVER.
2.Close SUPPLY STOPS.
Note: Keep water flowing out of faucet while shutting off.
4.Unthread STRAINER (1) using a 7/16" socket.
5.Pull out the STRAINER (1) and clean with an old toothbrush. Rinse thoroughly with water.
6.Install the STRAINER (1) back in its place and tighten with a 7/16" socket.
Caution: do not over tighten strainer.
Note: It is recommended to clean strainer every 6 months.
7.Replace ENCLOSURE COVER. Tighten cover screws firmly.
3HOW TO CLEAN AND REMOVE THE AERATOR; Fig. 3
1.Remove AERATOR HOUSING (1) with KEY (2) supplied with faucet.
3.Remove AERATOR (3) from HOUSING (1). Fig. 3a.
2.Clean the AERATOR SCREENS (4) with a old tooth brush to remove dirt.
4.Rinse Clean with water. Reassemble and install into spout end. Be sure the black seal washer is in place.
Fig. 2
1
CLEAN
SCREENS 1
INSTALL
REMOVE
Fig. 3
Fig.5
1
REMOVE
2
Fig. 3a
4
3
7 | M968857 REV. 1. 2 |