ASSEMBLY INSTRUCTIONS
12Cont’d
DE
D
DG
E
13
CP
CL
CO
CP
BC
12d. Attach the end of the side burner electrode wire (DE) to the underside of the side burner electrode, as shown in figure D.
Ensure that the wire is pushed in firmly.
12e. Place the side burner cooking grate (DG) into postion on the side burner shelf, as shown in figure E.
For propane model only.
13.Insert the flat end of the Tank Exclusion Bar (CP) into the groove on the upper back panel (CO), as shown in figure B. Next, attach the tank exclusion bar (CP) to the Front Brace (CL) using the self tapping, as shown in figure C.
#9 - ST4.2x10 Tapping Screw (x1)
13