LP orifice

Fig. B

Wing nut

Rotisserie

burner orifice

Orifice

Fig. A

Fig. C

Unscrew the Wing nut by hand so that the orifice can be taken out from the Rotisserie Burner Venturi (Figure A). Result shown in Figure B. Use the orifice removal tool to take out the LP orifice, as shown in Figure C. Then replace with a NG orifice that is provided in the conversion kit package, as shown in Figure D.

Note: Before beginning re-assembly of Rotisserie Burner orifice, ensure that the LP orifice has been removed. Proceed with re- assembly by reversing Steps 10 to 12.

removal tool

Rotisserie burner valve orifice

Fig. C

Fig. D

LP orifice removed

Fig. D

Replaced with NG orifice

1 5