L I G H T I N G
T H E G R I L L
Make Sure you have followed all the safety checks, procedures and instructions indicated in the previous section, before attempting to light the grill.
Lighting The Main Burners
1.Always open the hood completely and always inspect the grill and burners to confirm that all components are properly positioned before lighting the main burners.
W A R N I N G
Never stand with your head directly over the Barbecue when preparing
to light the main burners, to prevent possible bodily injury.
2.Always confirm that all of the burner control knobs are in the OFF position before opening the gas supply.
3.Slowly turn on the propane gas supply valve at the tank
4.Wait approximately 5 seconds before turning the CENTER burner Control knob to the HIGH position by pushing down on the knob and turning it
This procedure allows pressure to stabilize, and prevents the flow limiting feature from being activated.
5.Immediately press the Electronic Igniter. You will hear a continuous clicking sound as the module generates a spark to the burner. The selected burner should light within 5 seconds. Light all remaining burners by pushing in and turning the corresponding control knob, to the HIGH position. Each burner will automatically ignite.
W A R N I N G
IF THE SELECTED BURNER DOES NOT LIGHT,
immediately turn the burner control knob and cylinder valve to the OFF
position, to prevent gas buildup. Wait five minutes for the gas to
clear and then repeat the preceding starting procedure. IF the burner will not light when using the Ignitor, follow the match lighting instructions.
6