Kenmore 90109 manual Troubleshooting, Before Calling for Service

Page 19

!WARNING

The location of the burner tube with respect to the orifice is vital for safe operation. Check to ensure the orifice is inside the burner tube before using the gas grill. If the burner tube does not fit over the valve orifice, lighting the burner may cause explosion and/or fire.

Regardless of which burner cleaning procedure you use, we recommend you also complete the following steps to help prolong burner life.

1.Use a fiber pad or nylon brush to clean the entire outer surface of each burner until free of food residue and dirt.

2.Clean any clogged ports with a stiff wire, such as an open paper clip.

3.Inspect each burner for damage (cracks or holes) and if such damage is found, order and install a new burner. After installation check to ensure that gas valve orifices are correctly placed inside the ends of the burner tubes.

!WARNING

Spiders and insects can nest inside the burners of the grill and disrupt gas flow. This very dangerous condition could cause a fire behind the valve panel, thereby damaging the grill and making it unsafe for operation. Inspect the grill at least twice a year.

Troubleshooting

BEFORE CALLING FOR SERVICE

If the grill does not function properly, use the following check list before calling for service.

You should inspect the burners at least once a year or immediately after any of the following conditions occur:

PROBLEMS

WHAT TO DO

Grill won’t light when the control knob is

Check to see if LP tank is empty.

rotated.

 

 

Clean wires and/or electrode by rubbing

 

with alcohol and clean swab.

 

Wipe with dry cloth.

 

Make sure the wire is connected to

 

electrode assembly.

 

Do other burners on the unit operate?

 

Check to see if other burners operate. If

 

so, check the gas orifice on the

 

malfunctioning burner for an obstruction.

 

 

Burner flame is yellow or orange, in

Refer to Clean Burner Tubes and Burner

combination with the odor of gas.

Ports on page 19. If problem still exists,

 

please call 1-800-913-8999.

 

 

Low heat with knob in “HI” position.

Is the fuel hose bent or kinked?

 

Is the grill in a dusty area?

 

Is there adequate gas supply available?

 

If it is only one burner that appears low,

 

does the orifice or burner need cleaning?

 

Is the gas supply or gas pressure low?

 

 

19

Image 19
Contents Kenmore Kenmore Grill Warranty Table of ContentsPrecautions Proper Placement and Clearance of Grill Burner Flame Check Package Contents List 1pc Preparation Hardware Pack ContentsModel 90109 Parts diagram KEY# Parts Description Quantity Model 90109 Parts ListAssembly Instructions Firebox Assembly Side Burner & Side Shelf Assembly Side Burner Valve Assembly Installing Cooking Components Grease Cup AssemblyBattery Assembly Congratulations Connecting LP Gas Tank to LP Grill Checking for LP gas leaks Grill Lighting Instruction Grill Lighting Instructions for Main Burners If Grill Still Fails To Light Manually Lighting Your Grill by MatchCleaning and Maintenance Before Calling for Service TroubleshootingIndirect Cooking Cooking TemperaturesFlare-ups FromCanadian Food Inspection Agency Grill Cooking Chart