LP Tank Exchange
*Many retailers that sell grills offer you the option of
replacing your empty LP tank through an exchange service. Use only those reputable exchange companies that inspect, precision fill, test and certify their tanks. Exchange your
tank only for an OPD safety
*Always keep new and exchanged LP tanks in upright position during use, transit or storage.
*Leak test new and exchanged LP tanks BEFORE connecting to grill.
*Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.
LP Tank Leak Test
For your safety
*Leak test must be repeated each time LP tank is exchanged or refilled.
"Do not smoke during leak test.
"Do not use an open flame to check for gas leaks.
"Grill must be leak tested outdoors in a
"Use a clean paintbrush and a 50/50 mild soap and water solution. Brush soapy solution onto areas indicated by arrows in figure below. Leaks are indicated by growing bubbles.
Connecting Regulator To The LP Tank
l. LP tank must be properly secured onto grill. (Refer to assembly section.)
2.Turn all control knobs to the OFF position.
3.Turn LP tank OFF by turning OPD hand wheel clockwise to a full stop.
4.Remove the protective cap from LP tank valve. Always use cap and strap supplied with valve.
OPD Hand Wheel
j Type I outlet with
thread on outside
Do not insert a POL transport plug (plastic part with external threads) into the Type 1 tank valve outlet.
It will defeat the Safety Relief Valve feature.
If "growing"bubblesappeardo not useor movethe LP tank,
Contact an LP gas supplier or your fire department!
A Do not use household cleaning agents. Damage to gas
valve/hose/regulator components can result.
5.Hold regulator and insert nipple into LP! tank valve.
464220311 " 5