Kenmore 415.165059 manual HitchQtyPin2 Assem

Upper and lower Front Panel and Top brace

jLay front legs down on the floor. Fit upper front panel between legs. Attach with 2" hinge pins and hitch pins. iAttach lower front panel with #10-24x2" machine screws and #10-24 flange nuts.

Attach top brace with #10-24x2" machine screws and #10-24 flange nuts.

Right leg

#10-24
Flange Nut	HitchQtyPin2.	assem_	Left leg
Qty. 8			assembly
		#10-24x2"
		Machine Screw
		/
			Top brace
		Hitch Pin
			Pin
#10-24x2"			2" Hinge Pin
Machine Screw	2" Hinge Pin	f
Qty.8	Qty.2
		Lower Front Panel	#10-24x2"
			Machine Screw

Back Brace to Cart

Removepreviouslyattachedscrewsandnutssecuringthe upperlegandside braceas notedbelow.Attachupperandlowerback braceswith#10-24x1-1/4"screws and#10-24flange nuts.

#10-24x1-1/4" Machine Screw Qty.7

(One re-used)

#10-24

Flange Nut

Qty. 7

(One re-used)

BackBrace

Note:

Removepreviously installed screw and nut from location

shown to attach upper back brace.

#10-24x1-1/4" MachineScrew

Back Brace

14 °464722309 °464722509