Kenmore 415.165059 manual Control panel Left firebox Support

Control Panel and Firebox Support _] Stand cart upright.

In front, fit control panel between left and right legs. Insert #10-24x2" machine screws to hold panel in place. Place upper firebox supports onto screws making sure angle side is facing the front and attach with # 10-24 flange nuts.

In back, attach upper firebox support with #10-24x2" machine screws and # 10-24 flange nuts.

	#10-24x2"
AngleEdge	MachineScrew

Control panel

f f

Left firebox

support

#10-24x2" MachineScrew Qty.8

#10-24 FlangeNut Qty.8

Valve/Hose/Regulator and Ignitor

Attach valve/hose/regulator assembly to control panel using #10-24xl/2" machine screws.

_ Remove ignitor cap and plastic hex nut from Electronic Ignition Module assembly. Insert module into the opening on control panel and attach with the removed hex nut. Place AAA battery into module slot with positive end (+) facing outward. Screw ignitor cap onto module.

...............Button

#10-24xl/2" Machine Screw Qty.2

Valve/Hose/Regulator

Assembly ............

16,464722309 °464722509