Char-Broil 463270613 manual Upper back panel 20x1 ½ screw

Page 14

This step requires two people to lift and position grill head onto cart. Carefully lower the grill head onto the cart, aligning slots at bottom of grill head with posts on cart side panels. Make sure the regulator hose is

hanging inside the cart.

Grill head

Regulator hose

Right side panel

Left side panel

On back of grill, place upper back panel between side panels. Secure upper back panel in lower holes, using one 1/4-20x1½”screw on each side.

Upper back panel

1/4-20x1 ½" screw

Image 14

Contents Product Guide Date PurchasedTable of Contents This Grill is for Outdoor USE onlyInstallation Safety Precautions California PropositionLP Cylinder Filling USE and CareLP Liquefied Petroleum Gas UL listed Overfill ProtectionFor your safety LP Cylinder Leak TestTurn all grill control knobs to OFF Leak Testing Valves, Hose and RegulatorConnection, do not use this regulator Do not lean over grill while lighting For Safe Use of Your Grill and to Avoid Serious InjuryIgnitor Lighting Open lid during lightingSideburner Match Lighting General Grill CleaningSideburner Ignitor Lighting Burner Flame CheckVery Important Burner tubes must reengage valve Cleaning the Burner AssemblyStoring Your Grill Turn gas OFF at control knobs and LP cylinderLimited Warranty Items Manufacturer will not PAY forParts List Key Qty DescriptionParts Diagram Assembly RearUpper back panel 20x1 ½ screw Temperature gauge stem Shelf Front Side Track No Gear Trax TM HolesBack of main control panel Control panel Front brace Door Fiber washerHinge Pin Grease tray opening Left railTop of door Door back bracket IR cleaning tool for IR cooking grateDoor Wire AA Battery Cap Flame tamersGrease tray Assembled warming rack Warming rackIR cooking grate Before using LP Cylinder Not included RegulatorTroubleshooting Emergencies Possible Cause Prevention/SolutionAUTO-CLEAN Troubleshooting Electronic Ignition SectionPage Mail to / Enviar a / Envoyer à Special Offer