Char-Broil 06601295 manual Handle

Page 10

3	Items to Assemble:
	1 Base
	6 #10-24x1”Machine Screws

6 Lock Nuts (#10-24)

#10-24
Lock Nuts
Qty: 6	Base

#10-24x1” Machine Screws Qty:6

10-24x1” Machine Screws

Handle

Turn cart over as shown. Make sure wheels on base face away from control leg.

A Each leg attaches to base with two machine screws and hex nuts.

	Lock Nuts	Wheels opposite of handle.
	#10-24	Wheels opposite of handle.
	#10-24

leg correctly attached to base

A	Control Leg

4	Items to Assemble:
	1	Valve/Hose/Regulator
	2	#6-32x3/8” Machine Screws

A Insert valve stem into opening on control

leg, attach with machine screws.

A

#6-32x3/8” Machine Screws Qty: 2

A

Valve/Hose/Regulator

10 • 06601295

Image 10

Contents ASSEMBLY/USE & Care Manual Call Grill Service Center for Help and Parts Safety SymbolsInstallation Safety Precautions Parts List Key Qty. Description Kit NumberLP Tank Filling LP Tank LP Gas Supply CylinderLP Liquefied Petroleum Gas Hand wheel. Use only LP tanksLeak Test Connecting Regulator to the LP TankLP Tank Exchange Turn control knob to OFFTurning Grill Off Safety TipsHose Check Ignitor CheckRepainting Your Grill General Grill CleaningCleaning the Gas Train Storing Your GrillBefore Beginning Assembly PanelQty #10-24x1 Machine Screws Qty4 Handle Valve cover flanges goes inside control leg, attach with Two self-tap screwsHeat Plate Acorn Nuts Qty Ignition Wire Cooking grate rests on T-nuts All spare LP tanks must have safety caps installed From the safety relief valveSafety relief valve on the LP tank could activate Never fill the cylinder beyond 80% full. An overfilledHow To Tell If Meat Is Grilled Throughly Cooking ChartFood Safety Size/Qty Temperature TimeProblem Possible Cause TroubleshootingPrevention/Cure Days Limited warranty Limited warrantyPlease register your grill online at Intentionally Blank Char-Broil, LLC Columbus, GA 31902 Assembly Instructions