4. Assembly Instructions (cont.) | Step 5: | |
|
| |
Step 4: |
| Side Tables |
Handle | • | |
Grill Body Assembly | Assembly | provide sturdy table space when the grill |
| is in use. | |
• Make sure wheels and leg assembly |
| |
| • Be certain that the side tables are locked | |
are stable and will not slide. |
| |
| into place as shown when placing items | |
• Angle Grill Body (Part A) so Locking |
| |
| on the side tables. | |
Bar rests under Handle Assembly. |
| • The shelves slide inward for easy storage |
| Locking Bar | |
| and transport when the grill is not in use. |
• Lower Grill Body onto Left Up Tube | Steps for Folding and Transport | |
Assembly (Part M) as shown, aligning the | Step 1: | |
brackets on the bottom of the Grill Body | ||
| ||
between the brackets on the Left Up | • Slide side shelves in and close the Grill Lid. Ensure the Front Lid | |
Tube Assembly. | ||
• Secure Grill Body using 1 Grill Body | Lock is secure so Grill Lid will not open during transport | |
| ||
Connector Pin (Part E) and 1 Connector Pin |
| |
Cotter Pin (Part F) for each bracket |
| |
as shown. |
|
• Secure Locking Latch on back right side of grill.
Step 2:
• Unlock Securing Latch on back right side of grill
•Install Flame Tamer (Part B), Grill Grate
(Part C) and Drip Tray (Part D) as shown.
8 | 9 |