3.Clean the spark plug or replace it if it is cracked, broken, or if the electrodes are worn.
4.Install the spark plug and torque it to 17
5.Perform any needed maintenance procedures.
6.Fill the fuel in the fuel tank with fresh gasoline.
7.Check the engine oil level.
8.Connect the wire to the spark plug.
7.ACCESSORIES
You may purchase the following accessory from an Authorized Service Dealer: Side Discharge Kit
8.TROUBLESHOOTING
Exmark designed and built your lawn mower for trouble free operation. Check the following components and items carefully, and refer to Section X Maintenance for more information. If a problem continues, contact an Authorized Service Dealer.
Problem
Engine does not start
Engine starts hard or loses power
Possible Causes
1.The fuel tank is empty or the fuel system contains stale fuel.
2.The throttle lever is not in the Choke position.
3.The wire is not connected to the spark plug.
4.The spark plug is pitted, fouled, or the gap is incorrect.
1.The fuel tank contains stale fuel.
2.The fuel cap vent hole is plugged.
3.The air filter element is dirty and is restricting the air flow.
4.The underside of the lawn mower deck contains clippings and debris.
5.The spark plug is pitted, fouled, or the gap is incorrect.
6.The engine oil level is low or the oil is dirty.
Corrective Action
1.Drain and/or fill the fuel tank with fresh gasoline. If the problem persists, contact an Authorized Service Dealer.
2.Move the throttle lever to the Choke position.
3.Connect the wire to the spark plug.
4.Check the spark plug and adjust the gap if necessary. Replace the spark plug if it is pitted, fouled, or cracked.
1.Drain and fill the fuel tank with fresh gasoline.
2.Clean the fuel cap vent hole or replace the fuel cap.
3.Clean the air filter
4.Clean the underside of the lawn mower deck.
5.Check the spark plug and adjust the gap if necessary. Replace the spark plug if it is pitted, fouled, or cracked.
6.Check the engine oil. Change the oil if it is dirty or add oil if it is low.
- 35 -
