2.Since the plug is slightly wider than the discharge tunnel opening, rotate the plug clockwise slightly while inserting it (Fig. 5).
Note: Ensure that the arrow on the plug decal points upward.
3.Push the plug all the way in until the spring clip on the bottom of the plug clicks into place, locking the plug securely into the discharge tunnel (Fig. 6).
Spring Clip
Figure 6
4. Release the discharge door handle to lock the top of the plug.
3.5Service the Engine
3.4.1 Filling the Crankcase with Oil
For Units with Honda Engines: The engine crankcase can hold 22 ounces (0.65 liters) of oil. Use only
Before each use, ensure that he oil level is between the lower limit and upper limit marks on the dipstick (Fig 7.).
Figure 7
For Units with Kawasaki Engines: Initially, fill the crankcase with 30 ounces (0.88 liters) of oil. Use only
| Oil Capacity | |
With Oil Filter |
| 30 ounces (0.88 L) |
Without Oil Filter |
| 24 ounces (0.70 L) |
|
|
|
Before each use, ensure that the oil level is between the Add and Full marks on the dipstick (Fig. 8).
- 11 -