Exmark Metro 21 Series manual Fuel Tank Plastic Clips Bracket Self Tapping Screw Tank Base

3.3Installing the Fuel Tank and the Fuel Line (Units with Kawasaki Engines Only)

1.Start the two self-tapping screws into the bottom of the fuel tank and then remove the screws (Fig. 3).

2.Hook the plastic clips on the front of the fuel tank onto the fuel tank bracket (Fig. 3).

3.Secure the fuel tank to the tank base with the two self-tapping screws (Fig. 3). Do not overtighten the screws.

Fuel Tank

Plastic Clips

Fuel Tank

Bracket

Self Tapping

Screw

Tank Base

Figure 3

4.Remove the red cap from the end of the fuel line and from the end of the elbow fitting on the fuel tank (Fig. 4).

5.Slide the end of the fuel line onto the elbow fitting (Fig. 4).

6.Secure the fuel line in place with the fuel line clamp (Fig. 4).

Elbow Fitting

Fuel Valve

Fuel Line

Figure 4

3.4Installing the Discharge Tunnel Plug

1.Open the discharge door by pulling forward on the handle and moving it rearward (Fig. 5). Hold the discharge door handle to prevent the spring-loaded door from closing while you insert the plug.

Discharge Door Handle

Plug rotated clockwise

.

Figure 5

- 10 -