Steps for Folding and Transport (cont.)
Step 3:
•Stablize grill by placing foot on right side Bottom Leg Assembly Crossbar (Part L).
•Grab Right Side Handle and carefully lift Grill Body in upward motion so Locking
Bar disengages from Handle Assembly.
Right Side Handle
Step 4:
•Once Locking Bar is disengaged, carefully lower the grill, allowing the wheels to slide forward until the Gill Body is in a flat position.
Step 5:
•Lock Left and Right Secur- ing Latches to the Lock Posts located behind the grill.
To return grill to Cooking Position, reverse above steps:
•Unlock Left and Right Securing Latches.
•Grab right side handle and pull up until Locking Bar engages with
Handle Assembly.
•Lock Securing Latch on back right side.
5.Operating Your Grill
5.1Select a proper location
Once you have assembled your new grill, find a suitable location for use.
Note: The use and installation of this product must conform to local codes. In the absence of local codes, use the
National Fuel Gas Code: ANSI Z223.1/NFPA54, Storage and Handling of Liquefied Petroleum Gases, ANSI.NFPA 58 or Natural Gas and Propane Installation Code, CSA B149.1; Propane Storage and Handling, CSA B149.2.
mDANGER
1.Never use this outdoor grill inside any building, garage, shed or breezeway, or inside any boat, trailer or recreational vehicle and/or boat, to prevent possible fire and to prevent the possibility of carbon monoxide poisoning or asphyxiation.
2.Always place your grill on a hard and level surface far away from combustible materials and structures.
3.Do not use this grill under overhead combustible surface or covered area
(e.g., awnings, umbrellas, porches or gazeboes ). Keep all combustible surfaces at least 24” (61cm) away.
4. Locate the grill away from any combustible and
5.Never store or use gasoline or other flammable or volatile substances in the vicinity of this grill or in the vicinity of any other
6.Do not obstructing the flow of combustion and ventilation air.
10 | 11 |