Grill Assembly — 8100 Series
Side Burner Installation (continued)
16.Install the burner and cap (Fig. 27 and Fig. 28).
17.Install the grate over the burner (Fig. 29).
Cart Brace Installation
1.Open the grill door. The cart brace will be installed at an angle from the cart base to the back side of the compartment. The top end has a tab with a hole in the center. The bottom end has two protruding tabs.
2.Insert the two protruding tabs into the pair of slots located in the cart base (Fig. 30) .
3.Lock the cart brace in place by inserting (1) self tapping screw through the back side of the compartment from the outside and through the hole in the tab (Fig. 31).
4. Illustration showing the cart | Fig. 32 |
|
brace properly installed |
|
|
|
| |
(Fig. 32). |
|
|
|
|
|
Fig. 27
Fig. 28
Fig. 29
Fig. 30
Fig. 31
14