To Set Up continued
Step 6
LEFT LID (SHELF)
CENTER LID
RIGHT LID (SHELF)
■Unlock Right Side Lid.
NOTE: Undo latches on | LID FLAPS | |
front and back of lid. | ||
| ||
■ Release flaps to form |
| |
Right Side Shelf. |
| |
|
| |
|
|
IMPORTANT: Always remove Lids in this order:
•Right Lid first.
•Left Lid second.
•Center Lid last.
To Set Up continued
Step 7
■Install two Grease Pans from front as shown.
Step 8
■Install
■Carefully insert Shelf Lip on Right Side Shelf into Top Channel, while at the same time making sure the Notches on the side Flaps fit into the Flanges on the grill body.
SHELF LIP 
Igniter Module
Leak Testing
SHELF LIP
DETAIL “A”
DANGER
TOP CHANNEL
TO PREVENT FIRE OR EXPLOSION HAZARD:
TOP CHANNEL
NOTCH | DETAIL “B” |
|
NOTCH 
•NO SMOKING. DO NOT use or permit sources of ignition in the area while doing a leak test.
•Perform leak tests outdoors only.
•NEVER perform a leak test with fire or flame.
How to Check for Leaks
FLANGE | FLANGE |
|
|
|
|
■Repeat the same order for attaching the Left Side Shelf as you did on the Right Side Shelf.
■Remove Center Lid and set aside until ready for storage of the grill.
8
1.Make a soapy solution of equal parts mild liquid dishwashing detergent and water.
2.Turn off all burner control knobs.
3.Turn on fuel supply. Turn cylinder valve knob counterclock- wise (right to left) one rotation.
4.Apply soap solution to connections indicated with arrows in Fig. 15. If bubbles appear at these areas, a leak is indicated.
15