Sideburner
[] | Loosenside burner in side shelf. (B). To loosen, unscrew and remove two front screws and washers |
| holding sideburner in place. (A). Note: Do not loosen electrode screw. |
[] | Remove knob and bezel from sideburner control valve. To remove, pull knob straight out from valve |
| stem. Unscrew bezel from valve face and set the two screws aside. |
[] | Insert valve stem through hole in fascia. (C) Attach bezel to fascia and valve face with previously |
| removed 2 screws. (D) |
[] | Place sideburner tube over the valve, making sure that valve is inside sideburner tube. (E) |
[] | Reattach sideburner to sideburner shelf with the 2 previously removed screws and washers. (G) |
[] | Pushcontrol knob onto sideburner valve stem. (F) |
[] | Replace sideburner grate. (G) |
[] | Insert the small tips of the four main control panel wires into four of the five module sockets. Insert the |
| small tip of the sideburner wire into the fifth socket. For the other wire with larger tips, attach the |
| |
| control valve. (H) |
[] | Unscrew igniter cap from control panel. Insert (1)AA battery (not provided) into battery slot with |
| positive end (+) facing outward. Screw igniter cap back onto panel. (I) |