Sideburner
[] Loosenside burner in side shelf. (B). To loosen, unscrew and remove two front screws and
| washers holding sideburner in place. (A).Note: Do not loosen electrode screw. | ||
[] | Remove knob and bezel from sideburner control valve. To remove, pull knob straight out from | ||
| valve stem. Unscrew bezel from valve face and set the two screws aside. |
| |
[] | Insert valve stem through hole in fascia. (C). Attach bezel to fascia and valve | face with | |
| previously removed 2 screws. (D) |
|
|
[] | Place sideburner tube over the valve, making sure that valve | is inside sideburner tube. (E) | |
[] | Reattach sideburner to sideburner shelf with the 2 previously | removed screws | and washers. |
[] | Pushcontrol knob onto sideburner valve stem.(F) |
|
|
[] | Replace sideburner grate.(G) |
|
|
[] | Connect both igniter wires to the igniter module on the inside of the right fascia. To connect, | ||
| push igniter wire tips onto pins in igniter module. (H) |
|
|
[] | Unscrew igniter cap from control panel. Insert (1)AAA battery (not provided) | into battery slot | |
| with positive end (+) facing outward. Screw igniter cap back onto panel. (I) |
| |
B
C