Kenmore 119.1614521 LP Tank, ∙ Never fill a cylinder beyond 80% full, LP Liquefied Petroleum Gas

Page 4
OPD Hand Wheel
Use LP tanks only with these required measurements: 12” (30.5cm) (diameter) x 18” (45.7cm) (tall) with 20 lb. (9kg.) capacity maximum.

USE AND CARE

LP Tank

The LP tank used with your grill must meet the following requirements:

NEVER store a spare LP cylinder under or near the appliance or in an enclosed area.

Never fill a cylinder beyond 80% full.

If the information in the two points above is not followed exactly, a fire causing death or serious injury may occur.

An overfilled or improperly stored cylinder is a hazard due to the possible gas release from the safety relief valve. This could cause an intense fire with risk of property damage, serious injury, or death.

If you see, smell, or hear gas escaping, immediately get away from the LP cylinder and appliance and call your fire department.

LP Tank Removal, Transport, and Storage

Turn OFF all control knobs and LP tank valve. Turn coupling nut counterclockwise by hand only – do not use tools to disconnect. Lift LP tank out of grill. Install the safety cap onto the LP tank valve. Always use the

cap and retainer strap supplied with the valve.

Failure to use safety cap as directed may result in serious personal injury and / or property damage.

 

 

Safety Cap

Tank Valve

 

 

 

 

 

 

Retainer Strap

A disconnected LP tank in storage or being transported must have a safety cap installed. Do not store an LP tank in enclosed spaces such as a carport, garage, porch, covered patio, or other building. Never leave an LP tank inside a vehicle which may become overheated by the sun.

Do not store an LP tank in an area where children play.

LP tanks must be constructed and marked in accordance with specifications for LP tanks of the U.S. Department of Transportation (DOT) or for Canada, CAN/CSA-B339, tanks, spheres and tubes for transportation of dangerous goods. Transport Canada (TC). See LP tank collar for marking.

LP tank valve must have

o Type 1 outlet compatible with regulator or grill.

oSafety relief valve.

o UL listed Overfill Protection Device (OPD). This OPD

Safety feature is identified by a unique triangular hand wheel. Use only LP tanks equipped with this type of valve.

LP tank must be arranged for vapor withdrawal and include collar to protect LP tank valve. Always keep LP tanks in upright position during use, transit, or storage.

LP tank in upright position for vapor withdrawal

LP (Liquefied Petroleum Gas)

LP gas is nontoxic, odorless and colorless when produced. For Your Safety, LP gas has been given an odor (similar to rotten cabbage) so that it can be smelled.

LP gas is highly flammable and may ignite unexpectedly when mixed with air.

LP Tank Filling

Use only licensed and experienced dealers.

LP dealer must purge new tank before filling.

Dealer should NEVER fill LP tank more than 80% of LP tank volume. Volume of propane in tank will vary by temperature.

A frosty regulator indicates gas overfill. Immediately close LP tank valve and call local LP gas dealer for assistance.

Do not release liquid propane (LP) gas into the atmosphere. This is a hazardous practice.

To remove gas from LP tank, contact an LP dealer or call a local fire department for assistance. Check the telephone directory under “Gas Companies” for nearest certified LP dealers.

4

Image 4
Contents Kenmore Model/Modelo Item / ArtículoSafety Symbols Product RecordModel Number Serial Number Date PurchasedTable of Contents LP Tank ∙ Never fill a cylinder beyond 80% fullLP Tank Removal, Transport, and Storage LP Liquefied Petroleum GasConnecting Regulator To The LP Tank For your safetyLP Tank Exchange LP Tank Leak TestLeak Testing Valves, Hose, and Regulator Apartment and Condominium DwellersTurn all grill control knobs to OFF For Safe Use of Your Grill and to Avoid Serious InjuryMain Burner Igniter Lighting Safety TipsDo not lean over grill while lighting Turn controls and gas source or tank OFF when not in use General Grill CleaningMatch-Lighting Burner Flame CheckCleaning the Burner Assembly Spider AlertFood Safety How To Tell If Meat Is Grilled ThoroughlyStoring Your Grill Grilling Tips and TricksHardware Pack Listing Parts List HCDLBDA148Not Pictured HCDKBTA048Parts Diagram Install Cabinet Left Side and Right Side Panels Assembly InstructionInstall Cabinet Front Panel and LP Tank Bracket Install Hood and Firebox Assembly Phillips Head Bolt M6x10mm QtyInstall Grease Pan Bracket and Grease Pan ChainInstall Side Shelf Supports to Firebox Assembly Install Control Knobs Press 3 Control Knobs onto the valve stems as shown Attach Side Shelves Side Shelf OperationInstall Heat Diffusers, Cooking Grates, Warming Rack Place and Secure LP Cylinder into the Cabinet Install Grill Transport HandleBolts M6x25mm Transport Handle Heat Shield Qty Install Battery Congratulations! Assembly is now completeGrill Transport Main Burners Side BurnerTroubleshooting Número de modelo Número de serie Información sobre el productoSímbolos de seguridad Servicio de Instalación Sears Contrato de protección de reparacionesUn año de garantía ilimitada para su barbacoa Kenmore Botella de propano líquido Llenado de las botellas de propano líquidoCambio de botella de propano líquido Conexión del regulador a la botella de propano líquidoPara un uso seguro de la barbacoa y evitar lesiones graves Residentes de apartamentosConsejos de seguridad HI alto LOW bajo Limpieza del conjunto del quemador Aviso sobre arañasOrificio de Válvula Tubo de Quemador Guardar la barbacoa Seguridad de los alimentosPor el Usda Consejos y trucos para la cocina con barbacoaLista de piezas incluidas Lista de piezas No mostrado en la imagen Despiece Instrucciones de montaje Cabeza Phillips Tornillo M6x10mm Page Page Monte los estantes laterales PasadorFigura Page Advertencia ¡Enhorabuena! Ya ha montado su barbacoaPage Solución DE Problemas Solución DE Problemas continuación Get it fixed, at your home or ours MY-HOME1-800-469-4663