15Using the Rotisserie & Side Burners
The grill rotisserie system is designed to cook items from the back using infrared heat. The rotisserie burner is an infrared type which provides intense searing radiant heat. Preferred by chefs over other cooking methods, this intense heat sears in the natural juices and nutrients found in quality cuts of meats.
Remove the warming rack from the grill when using the rotisserie to
!prevent warping from the intense heat of the infrared unit.
NOTE: The rotisserie spit rod is centered between the grill hood and the burners. It may be necessary to remove the grates and flavor grids when cooking larger portions of meat on the rotisserie. This is by design, since this configuration gives you the most possible room above and below the rod for larger pieces of meat.
Once lit, the rotisserie burner will reach cooking temperature in 1 minute. The orange/red glow will even out in about 5 minutes. The rotisserie motor is equipped with metal gears and is capable of turning up to 40 lbs. of food. The motor is mounted on a bracket on the left side of the grill by sliding the motor over the bracket with the cord facing the back of the grill. Make sure the rotisserie motor is completely seated on the bracket prior to operating. Make sure the rotisserie cord is away from any hot surfaces.
Electrical Grounding Instructions
This appliance (rotisserie motor) is equipped with a
ATTACHING THE ROTISSERIE
The motor is mounted on a bracket on the left side of the grill by sliding the motor over the bracket with the cord facing the back of the grill.
With the rotisserie motor in place and plugged into an electrical outlet, it is now ready to oper- ate. Slide one of the meat forks onto the rod (prongs facing away from the rounded end. Push the rod through the center of the food, then slide the second meat fork onto the rod (prongs toward the food). Center the food to be cooked on the rod, then push the meat forks firmly together. Tighten the thumb screws. It may also be neces- sary to wrap food with butcher’s string, (never use nylon or plastic string) to secure loose portions.
Once the food is secure, insert the pointed end of the rotisserie rod into the motor assembly and rest the other end on the support on the right- hand side of the grill. (If needed, remove the cooking grates for more room). Turn the power switch to the “On” position to start the rotisserie motor.
Pointed End Of Rod
NOTE: Remove the rotisserie when not in use and store the unit indoors. Remove warming shelf when using rotisserie.
Do not use the rotisserie in the rain.