Electrolux 57" Gas Grill manual Grill Assembly, Igniter Attachment, E57 Igniter Assembly

5Grill Assembly

IMPORTANT: Remove all protective plastic film from stainless steel parts prior to assembly/use. This film is installed at the factory to prevent damage that could occur during shipment and handling.

IGNITER ATTACHMENT

1.Remove the igniter cap, spring assembly, battery and lock nut from Igniter. (See Fig. 1)

2.Insert the threaded section of the igniter into the U-shaped cut out of the igniter mounting bracket. (See Fig. 2)

3.Insert the threaded section of the igniter through the hole in the shelf and secure to shelf using the lock nut. (Use the igniter assembly diagrams to determine which igniter goes with which shelf.) Tighten securely. (See Fig. 3)

4.Re-insert the battery, positive side first, and spring assembly and attach the igniter cap. (See Fig. 4)

5.Repeat above steps for second igniter on the other shelf.

Cap Battery

Spring

Assembly

Locking Cylinder Mounting

NutBracket

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Keyhole

E57 IGNITER ASSEMBLY

Right shelf (three wire) Left shelf (three wire)