Electrolux 57" Gas Grill manual Side Shelf/Side Burner Assembly, Side Shelves Attachment

Side Shelf/Side Burner Assembly 6

SIDE SHELVES ATTACHMENT

1.Loosen the bolts on the side of the grill and attach the shelf by allowing the bolt heads to fall through the large opening in the bottom of the keyhole slots. Then slide the shelves downward until the bolts are resting against the top of the key hole slots. Tighten all of the shelf bolts. (See Fig. 5-6)

2.Attach the wires coming out from the sides of the grill to the Igniter terminals. (See Fig. 7)

3.Repeat for second side shelf

Note: It does not matter which wire goes to which terminal on the three wire igniters.

INSTALLING SIDE BURNER PLATES

1.There are two (2) black burners and caps that need to be installed for the side burner to operate correctly.

2.Place the burner and cap on top of the one burner. (repeat step for second burner.) (See Fig. 8-10)

3.Replace grate on top of the dual burners. (See Fig. 11)

Fig. 10

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 11

Fig. 9